Hello

I have setup shipping cost for this https://wdnhorse.com/product/hoofprints-across-time-a-trail-ride-to-remember-hard-cover/ $8 and for this product https://wdnhorse.com/product/nez-perce-scarf/ $5 if i add both in cart shipping cost shows $5 instead $13 .

Hi!

Your plugin is very good for me!

My question is as follows, let’s say there are 3 different products in the cart and each product has a different quantity.

For example: Product 1 – 3 qty, product 2 – 4 qty, product 3 – 5 qty. If I use the [qty] shortcode, it outputs the number 12.

And for me to calculate correctly, I need to output only the number of commodity varieties, for example [varqty]=3.

Is it possible to implement such a thing?

• This topic was modified 7 months ago by room7mail.

may i know the plugin are support with polylang?

Hi,
Is there a way that when I put the category id’s it should select the children automatcally?

Just a recommendation…. some calculations do not work…

Blanket ($10 for 1 product, +3.50 for other)
10 + ( 3.50 * ([qty] – 1) )

Does not work …
But this does work …

Blanket ($10 for 1 product, +3.50 for other)
6.50 + ( 3.50 * [qty] )

Note: It’s easier for the customer to have the equation be 10 and 3.50 … because the user doesn’t need to do any calculations.

• This topic was modified 11 months, 1 week ago by jabbamonkey.

The plugin development seems to stalled.
The last updated version 1.8 was released in 2021.
(Though the last update on the plugin info says 5 months ago.)
Is this still alive?

Hello,

I’m trying to set up the following costs table on a preprod website we are working on:

[costs_table prop=”qty” table=”1-4.95|2-6.70|3-7.60|4-0″]

• 1 item in cart : shipping cost 4,95€
• 2 items in cart = shipping cost 6,70€
• 3 items in cart = shipping cost 7,60€
• 4 items in cart and more = free shipping

screenshot: https://ibb.co/9cc03fD

The price is not showing in cart. I can select my shipping method but that does not show any shipping price, and does not modify total cost in cart either.

screenshot: https://ibb.co/d0twNRs

I tried with different separators (4.95 4,95 or 4 without decimal). My Shipping zone’s method is activated. The zone matches the customer’s address.

screenshot: https://ibb.co/bWfX6hJ

I do not know what I can do to see my shipping costs appear in cart… Any clue what I did wrong?

Kind regards,

Eva

• This topic was modified 1 year ago by Eva.

Please add High-Performance Order Storage (HPOS) support!

It’s a good plugin and easy to set up by category. However, it overrides the Printify shipping charges.

For example, In-house product category A shipping cost is $10 and shipping category B is $20. When both are in the cart, I want the $10 to be waived and the total in-house product shipping charge will be $20. It works perfectly as it supposed to before adding Printify products, let’s say P.

When A and P in cart, if I add B , then shipping P will drop off, and the shipping charge will be $20 in total.

When A and B in cart, if I add P, then shipping P won’t show. The shipping charge will be $20 as well.

When P in cart, if I add B then add A, it is fine, but not if I add A then add B, then shipping P will drop off.

How to set up the third party shipping in this plugin so it can stand-alone and won’t be affected by the shipping charge override of in-house A and B products?

Thanks.

• This topic was modified 1 year, 1 month ago by wonderwooman.

Is there a way to require a shipping address from the user before the custom shipping method is returned? We have a USPS method that defaults above the custom shipping methods we created. However, because the USPS method requires an address, it doesn’t get returned as a shipping method for logged out until they add an address on checkout.

Since the custom methods get returned before the address it added, Woocommerce auto-selects the custom method before the USPS is loaded.

Hi team,

I need to redirect users to a “custom shipping form” in order to make a custom quotation for their shipping when they are made from outside Catalonia. I mean I need to quotate specifically the orders made from Spain and from Europe, and the best situation will be that the user cannot place the order, but we shall receive the order details, but the client don’t pay the order till we have calculated the costs and instead of placing the order they must be redirected to the custom page.
https://www.casatoc.cat/transport-personalitzat/

I used the Advanced settings. Custom return URL, to Spain and EU but it is not working. Can you help me?

Hi There,

I have a website that has a number of different product providers.

Clothing has an integrated plugin that automatically calculates the cost for products in the cart.

For books the shipping cost is based on the price of the products bought.

Is it possible to do the following:

Only include books in the maximum cost of the cart for the purposes of calulating the shipping. eg.

Cart contains

1 x clothing – ￡15
1 x books – ￡15

total cart cost = ￡30, of which ￡15 is for books. Shipping cost is then based on ￡15, NOT the ￡30 total for the cart…

If so – how do I do this?

Hi.
thanks for the great plugin
I have a question about rounding type.
Does only the pro version offer “rounding type down”?

Hi

I am trying to set up the following

Large class – max of 3 large items for ￡50 or cost is doubled to ￡100 for 3 to 6 items and so on

medium class – per item in basket at ￡15, so 2 medium class and the cost is doubled, currently the cart shows one cost no matter how many I add to the basket

small class – per item in basket at ￡7, so 2 small class and the cost is doubled, currently the cart shows one cost no matter how many I add to the basket

I have the above setup in one shipping method, apart from the calculation part

how do I set up to trigger large items (up to 3) and for the other classes to be multiplied on a per item in cart basis

is this done with the qty shortcode? cant find any documentation or examples to describe this

Shipping class costs – how are these linked to existing classes? tried class name but doesnt do anything

many thanks

My client just purchased the Pro version.

I’m trying to set up shipping so that we charge a flat rate for certain classes, and shipping for anything not in one of those classes is calculated by the total cost of those products.

But at checkout we get the “Shipping options not available” error. (See my settings below)

I also do not understand how to add the icons/descriptions. I have enabled them, but can’t figure out how to set them up.

It appears there is almost no documentation- am I missing something?

I do need assistance by tomorrow or will have to return for a refund.

Thanks for your help!

My settings:

Shipping class costs
These costs can optionally be added based on the product shipping class.

"11x14 Prints" shipping class cost	"11x14 Prints" shipping class cost
5
"Totems" shipping class cost	"Totems" shipping class cost
15
No shipping class cost	No shipping class cost
[costs_table prop="cost" table="0-6|30-6.50|40-7|50-8|75-0"]
Calculation type	Calculation type
Per class: Charge shipping for each shipping class individually
Limits calculation	Limits calculation
Per class: Check limits for each shipping class individually

• This topic was modified 2 years, 2 months ago by alyxp.
• This topic was modified 2 years, 2 months ago by alyxp.
• This topic was modified 2 years, 2 months ago by alyxp.

Hello,

Amazon FBA fulfills my orders. I would like to offer expedited shipping for orders of more than 2 units and otherwise leave the standard shipping for single unit orders as the shipping rates are so expensive now.

Can this be accomplished?

Thanks in advance!

Greetings. I am looking for documentation on setting up this plugin. Thanks.

Hi there,
I installed the plugin as, although shipping is worked out by weight (same rate for the first 30kg), we need to also limit the volume per parcel (0.072m3).
In the first shipping rule, I entered the cost 9.65, then in max cart weight 30000 and max cart volume 72000 (the website is set in grams & cms). All other options I left as nil. But no matter what I place in the cart (definitely less than these limits), I only get ‘no shipping options’
What am I doing wrong?
Many thanks in advance!

When creating conditions for a product category, “Only the required products have to be in cart” and “All and only the required products have to be in cart” are not displaying shipping methods. When selecting the other two options, it displays fine.

I am testing with only products within that category in the cart.

Using Oxygen builder and woocommerce on php 7.4. Issue persists with all plugins disabled.

*Edit* It is working with some product categories but not others.

• This topic was modified 2 years, 10 months ago by pangaeawebservices.
• This topic was modified 2 years, 10 months ago by pangaeawebservices.

Hello, I want to know more before buying the pro version. I have two questions:

1. Is it possible to add a distance based shipping method with the following formula? For example:
a. For the first 10 miles, minimum shipping fee is $10.
b. For 11 miles – 40 miles, shipping fee is the minimum $10 + $2 per miles.

2. Is it possible to set the vehicle type for determining the distance between two address? (Because different vehicle might result in different distance for the same addresses, which will also cause the distance based shipping fee’s result to be different as well)

Thank you

after my last plugins/wp updates, the distance calculation stopped working
i got nothing in the woocommerce logs, nothing in the server logs, nothing in google console history and nothing in inspect element console log

in what other way can i define the problem?

Hi,
I am not able to see any settings from the plugin. But I get this message in the console log: woocommerce_shared_settings filter in Blocks is deprecated. See https://github.com/woocommerce/woocommerce-gutenberg-products-block/blob/trunk/docs/contributors/block-assets.md.

Can you have a look and see if the plugin still works as expected?

Fredrik

Hi, When using method availability to exclude a product for example, as well as excluding the custom shipping method where the setting is on, it also excludes all other shipping methods and shows no shipping methods available for that particular address even though it should fit into a different shipping method?

I would of expected for the custom shipping method where the setting is on to be excluded but the next hierarchal shipping method where the address fits to be used instead?

Please can you help?

hi, if i set a shipping with distance i cant set under order total some price the shipping have a fee above is free, how can i set correctly that ? (i have pro version)

Please, with that plugin is possible to calculate the price of shipping by distance beteewn two adress?

Can I set the value of quilometer and the system calculate automaticate?

Thank you

Wondering if there is a way to include Tax in Total in Min/Max cost check.

I found filter alg_wc_custom_shipping_methods_evaluate_cost_args_package but it fires after that check is done. Currently I managed to bypass this by changing $total in function is_available() to $package[‘cart_subtotal’] but a filter or an option would be nicer so we wouldn’t need to implement this on every update.

Hello,
I set up custom shipping cost based on different product IDs but when adding of one these products to my cart, the shipping cost doesn’t update and I even have “no shipping cost available” – seems like the connexion between the plugin and my website doesn’t work.

Can someone help?
Thank you,

Hello –

I installed this plugin because I wanted to create unique Shipping Methods for Products that can be “Delivered”, however, after installing this plugin it seems that it only creates 1 additional Shipping Method: alg_wc_shipping

Then they are only separated by “name”. Am I missing something here? This doesn’t seem any different than the default “Flat Rate” shipping method.

Thanks

Hello,
hope you are well.

Upfront Information:
I added the associated products by tagID and would like to make the highest shipping costs count/show only.
Means first shipping Method 29€ cost
second shipping Method 89€ cost
And would like to show only 89€ shipping costs on cart and checkout if both associated tagID/products are in the cart or use the 89€ and add a surcharge of some amount.
Currently it shows both shipping Method and you can choose the method.

I tried to use “Per order: Charge shipping for the most expensive shipping class” but don′t seem to work. Actually I tried all combinations of the “Shipping class costs” options and created some shipping classes for the products with the Tag/ID but always the same result.

Furthermore I can′t find any documentation for your plugin.

Thanks & best regards

Hello. Does cost table cost support in percent? for example I need $ 65 – $ 199.99 15.0%