e-volvesystems.com
Hello – our slider has been working well for years. All of the sudden, upon navigating to the home page, only one slide will appear. It does not dynamically update slides (it used to) and the user can not change slides.
Any help is greatly appreciated! Thanks!
Updated to resolved….browser issue. Boy is my face red!
]]>I’m having a problem and I’m not sure if it happened with my last update of Genesis, of WordPress or with something else. Every image in my slider after a certain point resizes to 920×400, no matter what I set the slider to. My blog is https://embracingimperfect.com/
You can see that the 3 or 4 most recent have that problem, while the old ones set properly. Currently the display settings are set to 740 max width and 480 max height. Any help appreciated! Thank you.
]]>The pictures on my slider have suddenly started going blurry. I’m using the same size pictures that I always have and that are good quality. Any ideas? southsoundcommunityguide.com
]]>After updating to the newest version my slider is offset and overlaps other elements on homepage.
]]>How to display slider from the single post attached images?
]]>Hi,
The genesis slider plugin shows the first image but doesn’t change.
Are you able to have a look and let me know what the issue may be?
I have tried disabling all the other plugins but it didn’t change the result.
Thanks
]]>Hi, I’m using the Genesis slider but I’m wanting to change something simple about it. What I’m wanting to change is that each title in the slider using an H1 tag. I don’t want it to do that. I’d rather it use an H3 or not use a header tag at all.
Could someone please tell me where to go to do that and how to do it?
Thank you very much.
]]>Hi,
I am using the slider just to show some images and having problems getting images to appear in the slider at the correct size. I have created images at 960 x 350 and set the slider display settings to 960 x 350. However, the image appears to be justified to the left and smaller than it should be. This means that there is a large white area to the right of the image. The problem can be seen here: https://vulcan-mdf.com. This happens whether I insert the image into the post content, or, set the image up as Featured Image.
Also, since upgrading to the latest version of WP, there are a number of images appearing that are not set up in any of the 5 posts,but still appearing in the slider. So I am not sure how they are being picked up! Do I have to delete all the posts and create new ones?
Any help would be greatly appreciated!
Cheers,
Chris
Version: 2.1.0
https://www.cariocatravelando.com
The slider is a header on my site, and when I visit it logged out of my website it does not load.
When I log into the site it appears though. Why won’t it appear/load? The slider is in the header, is that part of the problem?
The site is: https://plumleeassociates.com/ and you will see the slider in the top right corner.
]]>I’m customizing a website for a dear friend and the slider appears to working beautifully when logged in as an administrator but when we are logged out the slider doesn’t slide and the last image added to the slider appears as a static photo. I’ve tried deactivating all plug-ins that are unused. I deactivated the slider and then reactivated it. Nothing seems to be working. All settings appear to be normal.
You may check it out here: abedformyheart.com (the large you are the mother of all mothers picture wrapped in yellow should be the slider)
Thanks,
Jessica
Everytime I create a new post and categorize it under “slider” the slider displays no image. When I check the source, it seems to only partially load it.
I have tried modifying markup from working slider posts and still nothing. Viewing the source you can see how it does not load the 6th slider. (I have the slider settings to display the correct number of posts).
Website is https://thefieldfl.com
Can anyone please help?
]]>StudioPress,
You offer all these tools and plugins to make the sites match the themes you sell and then you do NOT update them.
Why not take the second to release the Slider you brag about on all your theme tutorials and update it so it’s approved to work with version 3.81?
I dont get it. I bought your package of themes for over $300 almost a year ago and almost every theme you sell all need plugins which have your name behind them, yet they havent been approved as “updated” to work with current versions of WP.
Yoast – Im surprised you still endorse these guys if what I wrote is accurate above. If it is true why not put a little pressure on them to get the updated version out.
I know there are other sliders out there, none really free, none endorsed to work well with genesis, etc. Please advise. Thanks!!
What gives? These are MY opinions. Please feel free to correct me or agree.
]]>I want the slider to only show the pages (not posts) I choose. It says” Choose the include / exclude slides using their post / page ID in a comma-separated list. (1,2,3,4 for example)”
But I cannot find the page IDs and there appears to be no catagories or tags for pages, so what can I do?
]]>My first two posts on Slider displayed beautifully, but the next two have the text box cut off on the top. It’s aligned differently than the other two, so the first couple sentences are missing and it’s clearly that the box is outside the display area, because only the bottom is showing. But it’s not happening for other posts.
What is this?
]]>While doing a fair amount of updating of pages, images, etc. The Genesis Slider became mixed-up and is showing text from one Page and an image from another. On other slides the text and images are missing altogether.
I’m not running any caching that I’m aware of (no cache-specific plugins), I’ve tried regenerating thumbnails (via plugin). I’ve made changes to, and re-saved the pages in question. I’ve also changed the pages/posts to appear in the slider and changed them back without any success.
Any thoughts?
]]>Is it possible to specify a “posts” category so that it only pulls posts from that category instead of all the latest posts?
]]>Please, I want to know if is possible to add jquery ken burns effect in genesis slider.
Thanks
The slider worked fine with WP 3.7.1 but disappeared afeter updating to WP 3.8
]]>Hi!
My is there any way to stop my slider buttons from showing up through the Navigation Sub Menus on my site?
Thanks! ??
]]>Hi!
I was wondering if there was a way to use both a Category Page + Pages in the slider?
If so, how can I do that?
Thanks! ??
]]>I don’t understand the process of this plugin. I install the plugin, fix the setting a bit, but I am confused as of where to go from there. I see people going into widgets and dragging the slider widgets into there sidebar but I dont even have that option where I have a slider widget. Please help me out.
]]>It would be terribly convenient to have one of the post selection options be “all children of Post ID”.
]]>Hi there
I have a text in the Slider Box (over the Picture) But the text always comes White with a transparent Background, so its not readable.
I searched every Function, where can i Change the colour of this Font!?
In the Post Title or text its also not possible.
I us the “terragon” as child theme.
thank you
Thank you
]]>Hi All –
I suspect/hope this may be an easy question to resolve, but the answer didn’t jump right out at me from reviewing some of the postings here.
I installed this plug-in in February sometime. (I really love it, BTW.)
Have the slider width set to 920 pix and the height to 300.
For some reason, the *old* images (from before I installed) fit properly/perfectly to the slider display (you’ll see many of these), while the newer articles (since February) just don’t.
Home Page URL: https://www.all-about-the-house.com
I’ve managed to find a scaling that gets things to fit reasonably and you’ll see this as one of the newer articles slides by. The dimensions that work (with the intentional white space on the right) is: 400 x 300 pix.
If I leave things alone… a “feature image” image of 2048 x 1536 pix gets terribly clipped in my slider – about 1/3 white space on the bottom and the top of the image is gone.
Any immediate thoughts on this?
I have a completely isolated test [LAMP] environment I can experiment with, as needed. Thanks,
Mark
]]>I like this Slider a lot and it works great except one thing:
I want the Genesis Slider to pull the most current post from each of my categories. Instead, it’s pulling all my recent posts. That means that some categories have 2 photos and some of my categories don’t show up at all. The slider is on my homepage.
I can’t find any documentation on how to set up the Slider. I have searched forums, my child theme support etc.
For example, if the way to do it is by Post ID — how do I set that? Where is the Post ID on the post?
In lieu of any How To documentation – on the StudioPress site there’s no discussion that I could find describing like basic FAQ on set up what I need to do is:
The Slider should show current post from each menu category, 6 in total. (rather than just pulling ALL my recent posts.)
I see the “include, exclude” button but have no idea how to do that. On Slider Settings, I set the drop down box to “All Categories” it pulls 2 posts from 1 category vs. 1 post (the most recent) from each category.
Thanks,
]]>We have a child theme compatible with Genesis. The slider only seems to be working when we use the option to “show latest posts” instead of being able to use it on a different page on our site. I do have the slider set up to be connected with pages, not posts currently. Previously it was set to link to posts, and I had the same problem when attempting to change the Home page to remove blog posts from showing. Is there a reason that the slider is only connected to this one page option? Shouldn’t it stay on the static home page regardless of whether or not I choose to display posts?
]]>I had the slider working however it quit working
ejsrealty.com is the live site
ejs.ourtestsite.net is the test site and it’s working either. I moved it last night
using studiopress genesis agent theme
I am working on this site: https://clairekcreations.com/
As you can see the slider is stuck on the first image, but the title doesn’t match and it looks like there are other titles hidden beneath it.
]]>I am creating a title and a photo for my slider. The title appears, but no photo. Any ideas? Thank you!
]]>