Hello.
I woluld lije to have any advice about this matter.
Please read the problem carefully before answering, because it only happens to me on one translated page, and not on the rest, using exactly the same configuration as on the three previous ones.
Look, the quickest example you can see is on the next page, although it happens on all the blog news pages and News we have in the Spanish translation.
You will see that on the right side the Foundation’s banner is displayed below the one above it and then it remains fixed.
The same thing happens, and it does the same on the French translation page (https://sierrablancaestates.com/fr/vie-consciente-du-luxe-lengagement-de-sierra-blanca-estates-envers-la-durabilite-du-vrai-luxe-a-travers-ses-projets-villa-sierra-blanca-et-karl-lagerfeld-villas-marbella/) and on the Polish translation page (https://sierrablancaestates.com/pl/luksusowe-swiadome-zycie-zaangazowanie-sierra-blanca-estates-w-zrownowazony-rozwoj-prawdziwego-luksusu-poprzez-swoje-projekty-villa-sierra-blanca-i-karl-lagerfeld-villas-marbella/).
However, in the Spanish pages (https://sierrablancaestates.com/es/luxury-conscious-living-la-apuesta-de-sierra-blanca-estates-por-la-sostenibilidad-del-lujo-verdadero-a-traves-de-sus-proyectos-villa-sierra-blanca-y-karl-lagerfeld-villas-marbella/)
you will see that the banner appears covering the one above it, and then it stays fixed as it should, but its configuration in all the translations is the same
I don’t understand where the error can be because the configuration in all the elements is the same, and the error is only in the Spanish page.
]]>Hi, the plugin is not working for safari.
Will there a fix for it pls?
Hello,
I am trying to fix a widget with a group of ads, so that it is fixed from the moment when the previous element to it, appears.
I have managed to leave it fixed, and that stands still in the area that interests me, before the footer, but I can not get it to appear when the other elements before it finish appearing. It always appears superimposed to the other elements, which are below.
Плагин Fixed Widget and Sticky Elements перестает работать после установки плагина Darklup Pro, как можно решить проблему, так как от Fixed Widget отказываться не хочу
]]>Hi,
Would be possible to turn the plugin off in mobile version?
Regards.
]]>Hi,
Thank you for this useful extension.
I’m having a problem with the screen width management.
If the screen is wider than the limit set to disable the extension, and it is reduced below that width after display (because we’re on a tablet and we switch from landscape to portrait view for example, or just to display another window on a computer) then the widgets stay sticky (and display over the rest of the content in my case).
I’m guessing this is a problem of detecting the change in screen width.
This happens with the advanced option on and off.
Thank you in advance for taking the time to reply,
]]>Hi, I’d like to know if I can upgrade to wordpress 6.4.3 with the latest version of this plugin.
]]>Hi there, Advanced Ads Team!
I have an issue with the plugin. When a widget is fixed (this is the widget at the bottom of the sidebar), if I do zoom in or zoom out (with Ctrl + or Ctrl -), the fixed widget becomes very narrow and tall. The rest of the widgets adjust themselves in a responsive manner, but the fixed widget becomes ugly and unusable.
If I try to go back to the original zoom level, the fixed widget does not correct its width. Only when I reload the page, the widget restores its normal width.
I have only text links in the fixed widget.
I hope this can be somehow fixed.
Thanks and regards,
Todor
]]>Hi! I am forced to use ver. 6.1.0 of your plugin, because all newer versions have different bugs. Even 6.1.0 is halfly stable (it has footer flickering on short pages).
I desribed this problem more than a year ago — https://www.ads-software.com/support/topic/fixation-doesnt-work/. But at the end I was ignored.
Please, let me know, if you’ll be able to test the plugin on my website, so I can update it to it’s last version. Thank you.
]]>Hello. Running version 6.2.3, anytime I update Fixed Widget settings page — the fixed widget stops working. The plugin doesn’t get triggered on page load anymore, even if I revert settings back after. However, if I delete the plugin, clear cache, and reinstall — it works again.
Where are some places I should be looking to troubleshoot this?
I want my opencart widget to stick so that the account and checkout can be seen all the way down the page, but when I have it set to improved version it does not work, when I uncheck improved version the widget scrolls but is behind the other content on the page. I have rechecked the improved version at the moment because it is distracting.
]]>Das Plugin funktioniert bei mir nur, solange nichts ge?ndert wird.
Sobald ich den Wert für den oberen Rand anpasse, stellt das Plugin seine Arbeit ein!
Danach reagiert es gar nicht mehr und nur wenn ich es komplett l?sche und wieder neu installiere, geht es genau so lange, bis ich wieder diesen Wert ?ndere.
Wie ich sehe haben andere auch ?hnliche Probleme und es kommt keine Reaktion. Kein Interesse mehr das mal zu fixen?
]]>Hello,
there is a problem when we increase or decrease the zoom of the page the width and height both go to 0. could you fix this?
]]>
I’m using the plugin to make a sticky table of contents and it seems when I zoom in or out the column stops “existing” as in it no longer takes up any of the width and the right column will overlap with it.
Also, on another note, there is an issue where it does not go all the way down to the stopping point as the height it a lot longer than the height of the table of contents.
I am using the improved version but have tried both and same results.
I am using a third party build called bold builder.
Any help on this would be greatly appreciated! ??
]]>Hi Thomas,
I am new to this plugin and have set it up.
1. However, I am experience a “double reload” for the product description as I start scrolling down the page.
2. As I resized the browser window from big to small, the “min width setting” to disable the sticky behaviour is not working, however it works on a page reload.
Any solutions will you suggest please?
Thanks!
Hi,
After the new wp widgets rolled out, the fixed widgets never work as before?
How do we get them to work again for fixed sidebar widgets with the new WP widget areas?
I have followed all your instructions and screenshots as best as I can tell too FYI and nothing is working.
We use a Divi based theme which is common FYI too.
]]>I use fixed widget plugin for my right sidebar widget but the image in the right sidebar disappears when scrolling down. This happens only on tablet and with all browsers. If i disable the plugin the issue goes away. I have tried disabling all other plugins with the fixed widget plugin activated but the issue is still there so it doesnt appear to be a conflict with another plugin.
]]>Hi, I have 2 headings “Account Reinstatement FAQ’s:” and “Catalog Management:” on the mentioned page. They are perfectly sticking on the screen while the browser is open in Desktop mode.
But they loose sticking capability when opened in mobile browser
]]>An empty (text)field appears when mouse-hovering a link in a widget made sticky with the plugin. Widget is navigationmenu.
How to let the field be gone or stay hidden?
Hi sir
Your amazing plugin fixed widget was working fine, until this day.
I have purged, all, cdn, cahce, browsing cache… and still not working.
Please, could you check what is it about
Thanks
]]>widget goes haywire when screen zoom in/out. Will share link privately once author request.
]]>Your plugin is very easy to set up except that the ad in the right hand column in the hueman theme won’t stick. Is there some kind of a conflict with hueman or any other common reason it just sits there. I want to use it with adsense ads.
Are there any common plugins or likely offenders that cause this problem.
And help you might be able to provide would be helpful.
Thank you
kg
]]>Hi! The fixed widget option is not working for HTML block. It keeps going back to “Unfixed widget”. Do you know why this could be happening? Thanks.
]]>Hello I have been trying to use sticky on one of our form and it seems that sticky feature is working but it is shrank when it is returned to normal. It looks pretty awkward in terms of user experience. So could anyone help me with this issue? I have been trying to solve this but couldn’t. The sooner the better please. Thank you!
]]>hi,
i have some widget with big height
Problem is widget become sticky at the top
how to scroll and see all widget and after he stick ?
thanks
]]>Today noticed the #shop-sidebar not remaining sticky with Epic Privacy Browser – a Chrome derivative. It isn’t a big deal, but if there’s sniffer code targeting Chrome, perhaps it could take a little more into consideration the engine capabilities than the brand, especially with the lesser friendly approach of Chrome toward privacy these days.
Hi
A few days ago we added Fixed Widget Version 6.2.3 to our site and setup the two first widgets that present ads to be sticky
As you can see from the attached screenshot – it immediately cause CLS on the site
https://www.dropbox.com/s/ylmdak1q0xdznvw/2023-03-15_10-37-28.png?dl=0
Is there is a way to fix this?
I also notice on the documentation that you address the CLS from problem from version 6.0
Thank you for your help
Yakov
]]>Hello,
after update Ad Inserter Pro to the latest version, we get “black pages” partial or total page when browsing.
The Ad Inserter Pro support with the help of our staging site found the issue which is a conflict with your plugin.
They found a workaround to solve the issue adding some code to the header :
<script>
? ai_no_sticky_sidebar_height = true;
</script>
Are you aware of the problem ?
Thanks for the help.
]]>I want the sticky widget to stop just before my footer. I just can’t find the ID. I tried ‘footer’ and a lot of variations, but it is still overlapping the footer. Anyone an idea?
]]>Hi,
I set up to disable on mobile at 400px width.
It works if reloading the page.
But if you have the screen at 1000px lets say, then resize to 400px, it still doesn’t disable it at 400px, and it can be seen on screen.
Can you help me with this?
Thanks
]]>