Hi,
this is exactly what I need, but since it hasn’t been updated for year, I hesitate to use it. Is there hope that it might receive an update someday?
Or an adequate alternative?
Thank you!
]]>Hello,
I have not tried the plug-in yet because I am having trouble finding the answer to a question from the screenshots and other information. Is it possible to set this up to have multiple reflectors but all using the same IMAP account? e.g. [email protected] and [email protected] both go to the same IMAP account, but emails sent to List1 should go to an entirely different list of recipients from List2.
Thanks – oh, and does it work with recent versions of WP?
https://www.ads-software.com/plugins/threewp-email-reflector/
]]>Is there a way to enable logging for this plug-in? (I’m using 1.18). I see the menu item for it in the screenshots, but it doesn’t show up in my installation. Probably just missing something obvious, but figured I’d ask.
https://www.ads-software.com/plugins/threewp-email-reflector/
]]>So far this tool works great for me. Thanks for the effort.
On my site, my writers are also all readers. It would be ideal if the following functionality existed:
1. Check if the e-mail author’s address is on the reader list.
2. If TRUE, then exclude that reader’s address from the reflected e-mail.
This way the writer (who is also a reader) won’t always receive a copy of the e-mail they just sent.
If there’s already a way to do this, I haven’t found it.
Just a suggestion. Thanks.
https://www.ads-software.com/plugins/threewp-email-reflector/
]]>All messages that are sent to the list email address are put just to the queue instead of sending them directly to the readers of the list. I do not want to moderate the list.
I have the following settings:
Acceptance rules:
All messages must be authorized: not checked
Non-writer action: Accept
Action for invalid codes: Ignore
Action for valid authorization codes: Accept
Action for valid moderation codes: Accept
Subject inline prefix: [test]
Readers: two mail addresses for testing
I use “Overview” > “Collect now” to test and the mails are put to the queue.
Do I have the wrong settings or is this functionality not implemented?
https://www.ads-software.com/plugins/threewp-email-reflector/
]]>I need to rewrite sender adress (from) to specified adress to send mails over a mail relay server. Is there any way maybe with the existing functionality? What codechanges may be necessary?
Marc
https://www.ads-software.com/plugins/threewp-email-reflector/
]]>I set up WP 3.9.1 with ThreeWP Email Reflector.
IMAP is shown in phpinfo().
After selecting “Collect now” I only get:
Connecting to secureimap.t-online.de with username ..
What can I do to get it working? Where to look for the logging?
Marc
https://www.ads-software.com/plugins/threewp-email-reflector/
]]>I have added my address as a Moderator, Writer, Reader. Every option listed, I have tried.
No matter how many times a message is sent, I receive the messages below:
2013-12-27 21:49:44
Connecting to mail.<domain>.org with username listtest@<domain>.org.
2013-12-27 21:49:44
2 messages found.
2013-12-27 21:49:44
Is 12345 a code?
2013-12-27 21:49:44
Ignoring message from <name>@<domain>.com.
2013-12-27 21:49:44
Is Testing plugin a code?
2013-12-27 21:49:44
Ignoring message from <name>@<domain>.com.
2013-12-27 21:49:44
Done.
—
Removed domains in the above log.
When I check on the ‘Code’ tab, it is empty and doesn’t provide a way to add a code.
I also double checked to make sure the listtest@<domain>.org was listed as the ‘Accept mail to these addresses’ and ‘Reply to’.
Any suggestions?
https://www.ads-software.com/plugins/threewp-email-reflector/
]]>So I made an email account to use as the mailing list ([ email redacted ]).
I filled out the accept mail to these addresses block with the rsvp email.
Imap settings : imap.mail.yahoo.com
username: xxxxxx
pass: xxxxxx
port 993
left everything else as default.
added rsvp to writers block.
added my email to moderator and to readers blocks.
hit save.
I did activate the list. When I push collect from all activated lists, I get that the cron completed. But my list doesnt get collected. If I push collect now on the list…It shows that it is connecting to my imap…and then just sits there.
Am I doing something wrong?
Greg
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>i,ve just setup ThreeWP Email Reflector and i have put in my mailinglists reply to address in the box and saved it.
Yet when i send an email to the mailinglist it is from the user that sent it not the reply to address .
Can anybody help please as i checked in the database and the reply to address is there.
Thanx
Justine
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>Just found out you can use https://www.mhonarc.org/ to archive and display your Threewp email reflector emails by thread or date.
Hope this helps folk.
Justine
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>Would you consider adding mailing list Subscribing and unsubscribing to this plugin please say via a page with a shortcode like on the subscribe page [subscribe] ????
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>Hi,
After trying different other email-group plugins, I was trying to get this plugin to work again, as I think it finally suit smy needs the best.
I got a list set up, and I can manually collect the list by clicking “collect now” on the overview-page. This shows me:
-Connecting to imap.mydomain.com with username [email protected].
-1 messages found.
-Is Test_1732 a code?
-Queueing message from [email protected] to Testlist.
-Done.
So, this works fine. Now the message appears in the queue-page and I can (manually) send the message using the ‘Send’ in the dropdown menu.
All good so far, testing manually works fine.
However, there are a few things not working for me:
– I can’t collect my lists using the ‘Collect all active mailing lists’ button on the overview-page. When I click this button, it shows me ‘Cron complete’ and ‘Collection complete’, but it doesn’t actually collect…
– I can’t send messages in the queue by using the ‘Send messages in the queue’ button. The messages are only sent when I select them, and use the dropdown menu above the list to select Send and hit the Apply button.
And most importantly:
– Automatic collecting and sending doesn’t work either, after collecting manually, I’ve waited several days (I know wp-cron gets triggerd by loading a website, so I tried triggering wp-cron by loading my website and the wp-cron.php file directly and even by a Unix wget cron) but the plugin seems not to get triggered by wp-cron.
I installed the ThreeWP Activity Monitor to view logs of the fetching process; this shows these two messages every 5 minutes:
– Starting 1 fetching children.
– Queues cleaned up.
Could these issues have to do with the version of WordPress I’m using? (WP v3.4.1, plugin v1.15) Is there a way to check if wp-cron works ok?
Thanks in advance.
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>Hi,
sometimes the WP Cron for collecting all active Lists doesn’t work.
I have a UNIX Cron which calls my site every hour and the WP Cron isn’t activated. I see sometimes a delay over 12 hours (my lists have to be collected each 15 min and the WP cron is set up as all 5 min).
When I press “Collect all active Lists” the list are collected correct.
I saw in your FAQ that i have to set the WP cron one minute less then my UNIX cron. But this doesn’t work either.
Is there a way that I can trigger this manual collection by a UNIX cron?
Is there a URL for this, where you don’t have to be logged in as administartor?
THX
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>I just installed this plugin, I think it will suit my mailing list needs perfectly, so I’m eager to get it working!
I installed the plugin, created a new list, left all settings as they were (except IMAP host name, username en password of course) and added a few readers.
Then I tested the list by sending a test email. But when collecting, I always get the message:
– connecting to imap.mydomain.com with username [email protected]
– 1 messages found
– Is testmessage a code?
– Ignoring message from [email protected]
I seems like collecting from IMAP goes fine, but all messages (also tried with other senders and/or recipients) seem to get ignored.
Is there some setting I missed or something else I’m doing wrong?
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>Hi there,
after updating to from Version 1.10 to 1.14 my messages won’t be queued.
When I collect a single list, I got the message that all things works fine and all messages are queued, but when I open the queue, it is empty, but no message was send. So the messages are lost.
I send a message from different mail sevices.
Do you have an idea what the problem is and how to solve it?
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>I have the reflector set up and if it worked it would meet my needs perfectly.
The only problem is that it does not actually send the mail. I have tried various settings to no avail.
Please advise what information you need from me to troubleshoot.
Thank you.
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>Hi,
when I want to save General settings and I do not check any log, then this error occur:
Warning: array_keys() [function.array-keys]: The first argument should be an array in /www/htdocs/w0092069/wordpress/wp-content/plugins/threewp-email-reflector/ThreeWP_Email_Reflector.php on line 2071
Warning: implode() [function.implode]: Invalid arguments passed in /www/htdocs/w0092069/wordpress/wp-content/plugins/threewp-email-reflector/ThreeWP_Email_Reflector.php on line 2071
correspending ling:
// And save the log types.
$log_types = implode( ' ', array_keys( $_POST['log_types'] ) );
The functionallity doesn’t break, but maye this is a security issue or something else…
Grz
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>Hi,
i want to say, that I like your Plugin a lot.
It saves me a lot of work.
But I have some ideas which could be find a place in the next release…
– Individual footer/siganture for a list: this should append an individual text at the end of the body to each mail which is send.
– Option for each to List for reply-adresses: If the option is checked the sender should be in the “reply-to” field of the header; if unchecked the list address (or the specified reply adress) should be in the “reply-to” field
I hope that these things aren’t so much work, so that you could fast implement this.
Thanks a lot
Grz
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>Hi,
this plugin is really great. I search for such functionallity a lot of time, then I found this. THX.
But I have a problem.
I have the mentioned problem with empty messages in hotmail. But I only have a webhosted server, so I can’t do anything with the IMAP konfiguration.
Is there a workaround or something else?
Thank you.
Grz
Daniel
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>I want to use the Plugin: ThreeWP Email Reflector but when i trie to collect the mails i get three Warnings and no mail is sent.
imap_headers(): supplied argument is not a valid imap resource in ThreeWP_Email_Reflector.php on line 1229
Warning: Invalid argument supplied for foreach() in ThreeWP_Email_Reflector.php on line 1239
Warning: imap_expunge(): supplied argument is not a valid imap resource in ThreeWP_Email_Reflector.php on line 1257
greetings & thanks
]]>Just tried it on my test system (WP 3.2 RC1) with mixed results:
– Setup and general workflow seems to be OK and working
– messages are picked up from IMAP account
– messages are delivered to eMail adresses
The problem:
All eMail message header information (like x-envelope etc.) is now inside of the body !
What can I do ?
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>Log shows: Mailbox for ‘[email protected]’ could not be opened!
https://www.ads-software.com/extend/plugins/threewp-email-reflector/
]]>