Hello,
when I’am updating to PHP 7.3 the Newsletter-Plugin doesn’t work anymore.
G-Lock says:
Error: G-Lock WPNewsman compatibility check failed, the plugin cannot be activated.
Please, fix the issues below and try again.
Passed PHP version >= 5.4 (You have PHP 7.3.9 installed.)
Passed Single-site mode (Doesn’t work in MultiSite setup.)
Failed MCrypt library (MCrypt library is required to securely store your passwords in the database. Read how to Install/Configure or contact your hosting provider if you’re on a shared hosting.)
Passed MBString extension (MBString extension is required for correct processing of non unicode characters. Read how to Install/Configure or contact your hosting provider if you’re on a shared hosting.)
Passed Direct filesystem access (Since version 1.5.7 direct access to the filesystem is required. Make sure that the uploads directory is writable by the web server( u89342052 user ).)
Passed Safe mode is turned off (Safe mode is deprecated in PHP and not supported by the plugin.(Set safe_mode = Off in php.ini. See Safe Mode on php.net))
Passed bcmath or gmp extension is loaded (Since version 1.7.0 either bcmath or gmp PHP module is required for the plugin to work. According to PHP documentation bcmath should pre installed since PHP 4.0.4.)
What can I do?
]]>Hallo,
… we’ve contacted you overyour support form on https://wpnewsman.com/support/, but no answer until today.
Spam via the registration form.
Our registration form will be flooded with non existing e-mail addresses. These then of course never be confirmed. But, with it, many error messages (“Mail delivery failed: returning message to sender”) are generated.
What can we/you do to stopping this?
Is there any possibility, to set a security ruls (like: captcha)?!
Thanks for your quickly help/answer!
]]>I have a mailing list of just over 1,000 members. When I send out an email to a list with under 100 members, it works just fine. However, when I send out to a large list, about 1,000, it sends multiple emails to the names on the list. I was thinking about upgrading to the pro version but I am afraid the same thing may happen again. Unless I can find a fix for this issue, I will have to go back to using MailChimp, which I would rather not do since a fairly high percentage of the emails from their servers are rejected as spam. I am between a rock and a hard place. Any help would be appreciated, thanks!
I don’t know if this will help or not but here is the mail.log from my mail server.
Feb 16 17:05:53 box postfix/cleanup[5556]: CBC2B1E4FF: replace: header Received: from khmtt.com (unknown [IPv6:2600:3c00::f03c:91ff:feeb:9642])??(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))??(No client certificate requested)??by box.cobrascyclin from unknown[2600:3c00::f03c:91ff:feeb:9642]; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<khmtt.com>: Received: from authenticated-user (box.cobrascycling.org [104.200.17.23])??(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))??(No client certificate requested)??by box.cobrascycling.org (Postfix) with ESMTPSA id CBC2B1E4FF??for <[email protected]>; Sat, 16 Feb 2019 17:05:53 -0700 (MST)
Feb 16 17:05:54 box postfix/smtp[4925]: CBC2B1E4FF: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[2607:f8b0:4003:c01::1a]:25, delay=0.84, delays=0.14/0/0.25/0.44, dsn=2.0.0, status=sent (250 2.0.0 OK 1550361954 e3si555471oia.139 – gsmtp)
Feb 16 17:07:43 box postfix/cleanup[5598]: 600071E469: replace: header Received: from khmtt.com (unknown [IPv6:2600:3c00::f03c:91ff:feeb:9642])??(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))??(No client certificate requested)??by box.cobrascyclin from unknown[2600:3c00::f03c:91ff:feeb:9642]; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<khmtt.com>: Received: from authenticated-user (box.cobrascycling.org [104.200.17.23])??(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))??(No client certificate requested)??by box.cobrascycling.org (Postfix) with ESMTPSA id 600071E469??for <[email protected]>; Sat, 16 Feb 2019 17:07:43 -0700 (MST)
Feb 16 17:07:43 box postfix/smtp[5558]: 600071E469: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[64.233.171.26]:25, delay=0.52, delays=0.15/0/0.24/0.13, dsn=2.0.0, status=sent (250 2.0.0 OK 1550362063 q26si1243624otn.209 – gsmtp)
Feb 16 17:09:32 box postfix/cleanup[5701]: 7FD811F0AF: replace: header Received: from khmtt.com (unknown [IPv6:2600:3c00::f03c:91ff:feeb:9642])??(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))??(No client certificate requested)??by box.cobrascyclin from unknown[2600:3c00::f03c:91ff:feeb:9642]; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<khmtt.com>: Received: from authenticated-user (box.cobrascycling.org [104.200.17.23])??(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))??(No client certificate requested)??by box.cobrascycling.org (Postfix) with ESMTPSA id 7FD811F0AF??for <[email protected]>; Sat, 16 Feb 2019 17:09:32 -0700 (MST)
Feb 16 17:09:33 box postfix/smtp[5558]: 7FD811F0AF: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[2607:f8b0:4003:c0c::1a]:25, delay=0.61, delays=0.17/0/0.27/0.16, dsn=2.0.0, status=sent (250 2.0.0 OK 1550362173 127si4174896oii.107 – gsmtp)
Feb 16 17:10:27 box postgrey[2102]: action=pass, reason=client whitelist, client_name=mail-it1-x12c.google.com, client_address=2607:f8b0:4864:20::12c, [email protected], [email protected]
Feb 16 17:11:21 box postfix/cleanup[6337]: 870EE1E469: replace: header Received: from khmtt.com (unknown [IPv6:2600:3c00::f03c:91ff:feeb:9642])??(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))??(No client certificate requested)??by box.cobrascyclin from unknown[2600:3c00::f03c:91ff:feeb:9642]; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<khmtt.com>: Received: from authenticated-user (box.cobrascycling.org [104.200.17.23])??(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))??(No client certificate requested)??by box.cobrascycling.org (Postfix) with ESMTPSA id 870EE1E469??for <[email protected]>; Sat, 16 Feb 2019 17:11:21 -0700 (MST)
Feb 16 17:11:22 box postfix/smtp[6327]: 870EE1E469: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[2607:f8b0:4003:c01::1a]:25, delay=0.61, delays=0.16/0.01/0.29/0.14, dsn=2.0.0, status=sent (250 2.0.0 OK 1550362282 n126si3903253oih.76 – gsmtp)
]]>Hi,
wondering if there will be any updates to plugin.
Image Link: https://prntscr.com/md0imo
As you know there has been a major release of WP.
Just wondering if this is not kept updated how am I to know the Pro version is any different!
People usually abandon plugins when they are not updated. I need to know, what I’m using is worth it!
]]>Subscriber with the unique code “txuddFSwbFWnSdI0YMTaVg” is not found.
I changed permalink and deactivate all plugin and tested. But still Same problem.
]]>I want to change the error handeling into red borders instead the message above the form. i don’t know how to do that by css. can anyone help me?
]]>Hello,
I currently need a Newsletter that is able to create 2 groups…customers and for businesses newsletters. Am I able to set up two separate sign up forms or create a single signup form where they select which to be in or even both if they so choose. Do you even have group newletter option?
Thank you!
]]>Hello, we moved the website gut-wulksfelde.de to a new webserver, which already is on PHP 7.2. The MCrypt-library is not supported anymore from this php-version (marked as “deprecated” since PHP 7.1). Therefore it is not possible to activate your plugin.
The customer needs the pro-version of your plugin, but does not want to invest money, until he is not sure, that it will work on his new webserver.
Can you please provide me with any information, if this problem is solved in the current version of the plugin?
Thanks a lot, Catharina
]]>Hi Support,
around the new EU privacy normative “GDPR Compliance” what are the changes that you will produce and what are the actions that we must undertake with our members?
many many thanks!
]]>Your plugin may be just what I’m looking for. I had a tough time finding it though. I ended up stumbling into it. May I make a suggestion?
Consider renaming your plugin “WPNewsman Newsletter.” It would be much more likely to turn up in a plugin search. I know it would have saved me a lot of time and effort.
Good luck from a fan.
]]>I have an Cannot parse server response error on my site. I cant get my forms and mails
]]>If someone subscribe for our newsletter, the subscriber and the administrator do not get notification email. Can You help us? In the submissions in the backend we see the subscriber as “not confirmed”.
]]>Hey, I have been looking all over the place for a plugin that allows me to create custom subscription forms with the ability for opt-in activation, sending emails to subscribers, maintaining subscribers, etc. and I finally come across wpnewsman-newsletters.
So you can imagine my discuss and irritation when I do all that is needed to set up the plugin, with admin emails, etc. but when I add the form on my site and enter my name and email for a test of my own, I get nothing. no email in the admin email where the submitted form is supposed to go and no opt-in activation link email sent to the subscriber.
But the “Test your settings: Send Test Email” works just fine. I recieve that email fine to my admin email, but as you know thats not going to help with people around the world coming to my site and wanting to subscribe.
What gives? Why is this happening? Seems so small of an issue that its easily fixable, unless its some other underlying issues that I dont know about.
Please help, I have clients waiting on websites to be built and I’m being held up because of an email that wont send. Thanks!!
]]>Hi
Maybe i can’t see for looking….
How can I add Recaptcha code to my form to stop spam entries
thanks
]]>Hi,
I’ve not used the email capability for some weeks, but it seems to have ‘stopped working’.
When I go to the editor I can’t easily delete instructions from the template ( ctrl key has no effect ) and there’s no “W” button for adding wordpress posts!!
There’s also no ‘Newsman’ button.
I thought it might be due to conflict with other plugins I’ve updated over the period, so I tried turning all other plugins Off – but this didn’t change things in any way.
What can I try next to find out what the problem is ??
Regards,
Mike
]]>Hello,
I’m trying to put css (to put style) in “mywebsite/subscription/confirmation-required/” page, but there’s no div or id that I can call to style the confirmation page.
How can I do it, please?
Thank so much!
]]>The list of subscribers is not showing. “Some error occurred” is displayed. However, the “Export to CSV” function works well. The subscribers are successfully added to the database but their info cannot be shown on the frontend under “Manage Subscribers”. Could you please advise how to solve this problem? Thanks!
]]>Hello,
In classes/class.newsmanUtils.php, there are several references to __DIR__.DIRECTORY_SEPARATOR.'install'.
However, install is not a subdirectory of classes, so these must be replaced with: NEWSMAN_PLUGIN_PATH.DIRECTORY_SEPARATOR.'install'
Otherwise, setting up multi-language email templates can be buggy (e.g. the list of pre-packaged supported languages is empty).
]]>Hello, the subscription form uses get_bloginfo('wpurl') to construct the action url.
This is causing a problem on a multi-language site that I manage, which uses WPML with a separate domain for each language. The form will always direct the user to the primary domain and ignore their currently selected language.
To fix the issue, I suggest that get_bloginfo('url') be used instead.
Hello,
i ask you already on your support about 3 weeks but not have an news information.
Do you will udapte soon your plugin pro version for can use with php7 ?
Thanks,
Cordially.
]]>Hello,
I have a little problem with WPNewsman Lite. I get sent test emails but other emails remain in the queue.I unable to send email.
Please find the below screen shot
https://115.112.118.252/wordpress/Screenshot%20from%202016-02-25%2015:10:38.png
]]>WONT work! does not take me to a landing page, only posts directly to my site! Nothing in my inbox in dashboard, tried off line subscription nothing to my regular mail, had hopes this would work too good to be true. this is in the middle of my website it text… no color landing page only black and white,,,, google chrome, schema premium theme, have to unplug you now dang it and look again somewhere else, hard to find plug ins that work on wordpress.
YOU’RE ALMOST DONE – ACTIVATE YOUR SUBSCRIPTION!
YOU’VE JUST BEEN SENT AN EMAIL THAT CONTAINS A CONFIRM LINK.
In order to activate your subscription, check your email and click on the link in that email. You will not receive your subscription until you click that link to activate it.
If you don’t see that email in your inbox shortly, fill out the form again to have another copy of it sent to you.
]]>Hello,
Recently someone unsubscribed from a Newsman Lite email list and though the program usually sends me one unsubscribe email this time it sent me over 100 copies of the same exact email. And the unsubscribe emails keep appearing daily. Can you please help?
Thanks!
Activating plugin following update 1.8.17 results in the following error:
Plugin could not be activated because it triggered a fatal error.
Parse error: syntax error, unexpected ‘[‘ in /home/cypruspr/public_html/wp/wp-content/plugins/wpnewsman-newsletters/lib/emogrifier/Classes/Emogrifier.php on line 91
(I also have WPNewsman Pro Version 1.5.9)
]]>I am checking this plugin WPNewsman Lite (https://www.ads-software.com/support/plugin/wpnewsman-newsletters) It creates a form which I can use on sidebar. But on bottom of widget it shows a small “Powered by WPNewsman” which doesn’t gel well. Now I don’t want to say that I don’t credit plugin developer. If this plugin is good I can definitely recommend to people but it would be nice if there was any option to hide it, which I normally see in other plugins, would have been good.
Alternatively, if it is possible to wrap around this “Powered by WPNewsman” text using font size 0? Is that possible? How?
I would appreciate if someone guide me how and where to try to hide it using css or .php files? I am not a coder but if someone could guide me on right direction I might solve it.
Note- I will be using it on TwentySixteen theme.
WP v4.4.2
Thanks
]]>Import from CSV -> Upload a file -> Error: Upload failure reason unknown. Error: XHR returned response code 404
Please help
I would like to be able to allow editors to send emails. Is there a workaround to allow that?
]]>On a few of my sites, I am starting to find that the WP Newsman Lite plugin is deactived, along with a message stating:
“The WP Newsman Lite plugin has been deactivated due to an error. The plugin does not have a valid header.”
How can I update and validate the header to allow the plugin to be reactivated?
]]>(Appologies if Google Translate makes a mistake.)
Hello,
I have a little problem with WPNewsman Lite. I get sent test emails but other emails remain in the queue.
I use the SMTP server of Google (https://support.google.com/a/answer/176600?hl=fr)
I read the discussion (https://www.ads-software.com/support/topic/emails-stuck-as-pending?replies=10) but the solutions are not working.
Thanks for your help.
]]>I’ve spent the better half of the day trying to find a newsletter plugin that won’t auto send an email every time I create a post.
I need to make sure there is no auto annoy feature and that this will only send an email newsletter when I create it and click send.
Does it do that?
]]>