Choice + Ad Inserter Setup & Support

Hello, I did all the changes and also I installed the latest version of Ad Inserter which is 2.6.11-3.

So after installing and making the changes nothing happened, then I activated “client – side – insert” in general tab, but nothing changed, I tried everything and nothing works.

Receipts: https://i.imgur.com/YeIf0jj.png When I tried to visit https://www.musicmundial.com/en/ and accept the cookie consent by quantcast, nothing is happening even if I refresh the page, the ad is still not showing, all ads are inserted with AD Inserter and only have quantcast as CPM.

If I need to make some changes please tell me, I will be grateful. Thank you so much.

It works as configured. I see no issues.
After you give the consent and refresh the page the blocks are inserted and ads displayed.

@rbaronqc

It seems that issue I’ve reported few hours ago is not Ad Inserter related, but this plugin related. IT could also be Chrome browser.

So, when I test plugin, and reject everything, Partners are turned off, every single one of them. And this is where the issue begins, many of us test exactly that – rejecting all cookies, to see what happens. You can’t turn on Partners back. Deleting all cookies doesn’t work (basically, Quantcast form doesn’t pop up again, only options in the bottom corner.) Clicking on the Agree button doesn’t turn back on all Partners. Not sure how I even got them all turned down, because, in Firefox that doesn’t happen, when I reject all cookies. https://i.imgur.com/463G2Fq.png

Hi to all, we are facing in all our sites the same problem as @vsharmilee and @sneesel, hopefully there is a solution soon. Thanks!

After updating to developer version of Ad Inserter plugin and including at ads: euconsent-v2[vendor][consents][755]=true && euconsent-v2[purpose][consents][1]=true, euconsent-v2[gdprApplies]=false, problems are still there:

1. When you accept the Quantcast choice, some ads appear at widget side but all on top of the other (unreadable), the page is shown disassembled.
Only widget ads try to show (but all messed up: jobs.trabajaribiza.com) and website ads do not show at all.

2. The ads do not show untill you manually refresh the page, should be automatic, not manual refresh.

3. Cookies are being accepted, before accepting Quantcast choice too: https://prntscr.com/u3x2kn, even ads are not showing at all.

I think things are still the same, It does not make sense that all the ads of the widgets are mounted on top of each other and that in the part of the posts / pages, no advertising is shown. Something is not right, because everything is disassembled, plus it does not self-refresh page after accepting.

Thanks in advance for help.

@spacetime, we have developer option enabled as you asked for it at jobs.trabajaribiza.com. Thaks for your time both (@rbaronqc)

I found this at Ad Inserter plugin page: https://adinserter.pro/documentation/additional-block-settings#manual-loading (automatic and manual loading) for ads to show automatically after accepting terms, so the page autorefreshes, but can’t find those options at Ad Inserter plugin.

I think that if it’s an option only at pro version or something similar, shouln’t be, as I think is a plugin for showing ads and if this isn′t included in the free version, ads won’t show automatically until client has to manually refresh the page (but if he doesn′t at all?), ads do not show, so the plugin doesn′t do the job as should and have to pay for that autofresh? I’m not sure, … I don’t know if that’s the case, just asking, but if so, I think it shouldn’t as is something BASIC, for the proper operation of advertisements included in Ad Inserter plugin.

Debugging options activated: https://prntscr.com/u3x5vu – https://prntscr.com/u3x6el, doesn’t show in our site admin top bar: https://prnt.sc/u3x6re, so we can’t either debug any problem with our ads.

@ibiza69

1. Screenshots are useless for debugging.
You need to provide actual page address (with remote debugging enabeld) in order to check your Ad Inserter settings and page loading.

I checked jobs.trabajaribiza.com but on this (home)page I see only one block inserted by Ad Inserter and the block seems to be inserted properly.
You are also using AdSense Auto ads (script in the header) which inserts ad codes automatically:
https://adinserter.pro/documentation/adsense-ads#auto-ads

2. This is normal and expected behavior. Cookies (and consents) are checked when the page is loaded. It is possible to “manually” insert the ads after the consent is given but for this you would need to upgrade to pro as some additional plugin features are needed.

3. If properly configured, Ad Inserter will insert ad codes only after the consent is given (and page reloaded). Only after the ad code is inserted it can be executed and cookies from this code created. Od course, this applies only to blocks (ads) inserted by Ad Inserter configured to wait for the consent.

I would suggest to all who have issues with the plugin and need some help to open a separate support thread as each case is different and has a different site address. This would also simplfy tracking support threads.

Thanks.

Hi @spacetime, I’ll try to keep everything as you like:

1. We have activated I think last week, not this one, last one for you the debbugin remote options, with no more news from you, …if you remmeber (when you asked for it and we confirmed instantly).

2. I’ve taken off the Adsense page level ads code at header, as we have it turned off at adsense website, we never used it, as we don’t like it (thank you!).

3. “I checked jobs.trabajaribiza.com but on this (home) page I see only one block inserted by Ad Inserter”.

In this page we have like 3 ads, plus widgets side 2 more, so in total 5 ads aprox., inserted by your plugin (Ad Inserter), you can check by your side with remote debuggin options or I can share them with you. In no case 1 ad.

2. “Cookies (and consents) are checked when the page is loaded. It is possible to “manually” insert the ads after the consent is given but for this you would need to upgrade to pro as some additional plugin features are needed”.

You mean, that your plugin does not work in “free mode” and we should look for another that works as adsense requires to properly comply with their posting terms? If not, please examplain, we are from Spain and trying to underestand all your explanations, but they are so confussing, that is hard.

3. “If properly configured, Ad Inserter will insert ad codes only after the consent is given (and page reloaded). Only after the ad code is inserted it can be executed and cookies from this code created. Od course, this applies only to blocks (ads) inserted by Ad Inserter configured to wait for the consent.”

But only works in the PRO version, isn′t it? As we have everything as you explained and things are not working properly, ads don’t show, page doesn′t refresh, and everything is unmounted. Can you please explain better?

About have a separate support thread, I had one and was impossible to be alone, as everyone is facing same problem, with ad inserter and quantcast, so what else can I do, say to them to not post there? https://www.ads-software.com/support/topic/google-adsense-problems-and-notice

We would really like to have a quick feedback to be working together on solving this, but just don’t know how to make it, as there are so lot of people facing this and writting back, waiting for answers from Quancast side and your side, that is really difficult for all of us.

Thank you! Hopefully you can get to know what is happening with the remote debuggin option that we activated for you last week, and get to know where the problems are, but maybe as you said, your plugin if is not in PRO-PAID version, will not do the job well in any case, so better to say, so all people that are asking know too and decide what to do.

@ibiza69

I’ll try to check again and answer your questions.

1. You have error on the page coming from
webpack:///./build/ts-to-es6/src/managers/PermissionManager.js

PermissionManager.js:88 Uncaught (in promise) TypeError: Cannot read property ‘pushNotification’ of undefined

I got this error when checking the page on phone.
Please try to fix it, Ad Inserter client-side featutres need error free pages.

It seems you have disabled Block class name and Block number class. Please enable them for debugging purposes.

It seems that consent is properly processed , however, some other issues seem to be present.

2. Great.

3. Yes, see #1

2. No. The plugin works as described. It inserts the codes as configured. However, if you need to insert ads immediatley after the consent is given, then this is not possible with the free version.
I believe Ad Inserter is the only WP plugin for ads that has most of the insertion features available in the free version.

3. No. See above. I’m trying to say that for the ad codes not inserted via Ad Inserter, Ad Inserter will have no control over them.

Yes, I understand that many people have issues. However, the best way to get and give support is to have separate threads for each issue. This is also one of the guidelines for this support furum.

Please enable block classes so I can debug and diagnose the issues.

@spacetime, enabled those modules that what you asked for.

“Error”, can’t know from which plugin is comming from, so web can’t solve it, as it’s a plugin developer problem, maybe if you get to know what plugin is giving that error, I can communicate them with you, so you explain them that your plugin can’t work (developer to developer), if they do not fix their plugin.

And we have all our ads inserted thru your plugin, no other ??

Thanks in advance for your time shared with us.

@ibiza69 thanks.

No clue regarding that error.
It seems it is coming from something like “OneSignal Web Push SDK”.
Check if you are using something like that.

I believe we are very close now.
Please install this version:
https://downloads.www.ads-software.com/plugin/ad-inserter.zip

Hi again!

1. Plugin is https://onesignal.com we use it for mobile and pcs push notifications. Do you want me to talk with them? Maybe they fix it… :S

2. I uploaded your new plugin update and…

NOW YEAH!!!, you’ve done an AMAZING job @spacetime!!!! Ads show correctly at the site, after accepting Quantcast terms and refreshing manually the site.

Can I confirm with you tomorrow or Monday in case you rest, if the error message in adsense 2.1a disappeared for this website (jobs.trabajaribiza.com)? So I can proceed with our other sites. So we all leave doubts?

Although it gives me to think that if we had already implemented the code correctly since Quancast v11, which I think was the day before yesterday, the 2.1a message should have disappeared in adsense, right?

Or maybe after todays update of your plugin, may the message disappear in the next daily adsense check?

what do you think?

Thank you very much for all your time

@ibiza69

1. Yes, they should be able to diagnose and fix the issue.

2. Great! I can confirm that Ad Inserter properly inserts ad codes only after the consent is present in the cookie. Google errors coming form ads inserted via Ad Inserter should go away.

The problem was related to missing block classes you have disabled. Now you can disable them if you don’t want them.