adrianbakar

Thanks! Works perfectly

Thank you for your reply. I did attempt to change the css, but after playing around with it, I realise the reason you made it that way is when there are many comments it tends to get messy, especially on mobile view. So I set up the single fields instead, so the full comment will be displayed on a separate page. Fantastic plugin, really well thought through!

I have the same problem, any way to fix it?

https://i.postimg.cc/43Vv14Cr/No-Days.png

Hello, after I did this:

Bitnami stacks recollect all the htaccess information in a single file, /opt/bitnami/apps/wordpress/conf/htaccess.conf in your case and the AllowOverride option is set to None. Therefore, please add what you modified at /opt/bitnami/apps/wordpress/htdocs/.htaccess to that file and then, restart Apache.

It started working actually, so problem solved. Thanks for your help! Much appreciated! Will give the plugin a go, and consider the pro version if it works out. Thanks again and have a nice day

I checked your suggestion, I had already done that from reading a similar suggestion on bitnami forum. This is the output from /opt/bitnami/apache2/conf/httpd.conf

#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:https://httpd.apache.org/docs/2.4/&gt; for detailed information.
# In particular, see
# <URL:https://httpd.apache.org/docs/2.4/mod/directives.html&gt;
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They’re here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server’s control files begin with “/” (or “drive:/” for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with “/”, the value of ServerRoot is prepended — so “logs/access_log”
# with ServerRoot set to “/usr/local/apache2” will be interpreted by the
# server as “/usr/local/apache2/logs/access_log”, whereas “/logs/access_log”
# will be interpreted as ‘/logs/access_log’.

#
# ServerRoot: The top of the directory tree under which the server’s
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot “/opt/bitnami/apache2”

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:logs

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule’ lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l’) do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
#LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule http2_module modules/mod_http2.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
#LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
#LoadModule mpm_worker_module modules/mod_mpm_worker.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule info_module modules/mod_info.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule php7_module modules/libphp7.so

<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>

# ‘Main’ server configuration
#
# The directives in this section set up the values used by the ‘main’
# server, which responds to any requests that aren’t handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
#
ServerAdmin [email protected]

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn’t have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# Deny access to the entirety of your server’s filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
#
<Directory />
AllowOverride none
Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled – so if something’s not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot “/opt/bitnami/apache2/htdocs”
<Directory “/opt/bitnami/apache2/htdocs”>
#
# Possible values for the Options directive are “None”, “All”,
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that “MultiViews” must be named *explicitly* — “Options All”
# doesn’t give it to you.
#
# The Options directive is both complicated and important. Please see
# https://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be “All”, “None”, or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files “.ht*”>
Require all denied
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host’s errors will be logged there and not here.
#
ErrorLog “logs/error_log”

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat “%h %l %u %t \”%r\” %>s %b \”%{Referer}i\” \”%{User-Agent}i\”” combined
LogFormat “%h %l %u %t \”%r\” %>s %b” common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat “%h %l %u %t \”%r\” %>s %b \”%{Referer}i\” \”%{User-Agent}i\” %I %O” combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog “logs/access_log” common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog “logs/access_log” combined
</IfModule>

<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server’s namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo https://www.example.com/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing “/” apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ “/opt/bitnami/apache2/cgi-bin/”

</IfModule>

<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock cgisock
</IfModule>

#
# “/opt/bitnami/apache2/cgi-bin” should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory “/opt/bitnami/apache2/cgi-bin”>
AllowOverride None
Options None
Require all granted
</Directory>

<IfModule headers_module>
#
# Avoid passing HTTP_PROXY environment to CGI’s on this or any proxied
# backend servers which have lingering “httpoxy” defects.
# ‘Proxy’ request header is undefined by the IETF, not listed by IANA
#
RequestHeader unset Proxy early
</IfModule>

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to “handlers”:
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add “ExecCGI” to the “Options” directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add “Includes” to the “Options” directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 “The server made a boo boo.”
#ErrorDocument 404 /missing.html
#ErrorDocument 404 “/cgi-bin/missing_handler.pl”
#ErrorDocument 402 https://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values ‘default’, ‘none’ or ‘unlimited’.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

Include “conf/deflate.conf”
Include conf/pagespeed.conf
Include conf/pagespeed_libraries.conf

AddType application/x-httpd-php .php .phtml

# This enables using PHP-FPM when mod_php is disabled
<IfModule !php7_module>
#https://docs.bitnami.com/general/components/php-fpm/#php-fpm-did-not-handle-the-connection-error
Action application/x-httpd-php “/bitnami-error-php-fpm-did-not-handle-the-connection”
Define USE_PHP_FPM
Include “conf/php-fpm-apache.conf”
</IfModule>

<IfModule headers_module>
<IfVersion >= 2.4.7 >
Header always setifempty X-Frame-Options SAMEORIGIN
</IfVersion>
<IfVersion < 2.4.7 >
Header always merge X-Frame-Options SAMEORIGIN
</IfVersion>
RequestHeader unset Proxy
</IfModule>

# The following lines prevent .user.ini PHP settings files from being viewed by Web clients.
<Files “.user.ini”>

<IfVersion < 2.3 >
Order allow,deny
Deny from all
</IfVersion>
<IfVersion >= 2.3>
Require all denied
</IfVersion>

</Files>

# Security
ServerSignature Off
ServerTokens Prod
TraceEnable Off

Include “/opt/bitnami/apache2/conf/ssi.conf”

Include “/opt/bitnami/apps/bitnami/banner/conf/banner.conf”
AddType application/x-httpd-php .php
<IfModule php7_module>
PHPIniDir “/opt/bitnami/php/etc”
</IfModule>

Include “/opt/bitnami/apache2/conf/bitnami/bitnami.conf”

Include “/opt/bitnami/apache2/conf/bitnami/httpd.conf”

I think the issue is related to this:

Bitnami stacks recollect all the htaccess information in a single file, /opt/bitnami/apps/wordpress/conf/htaccess.conf in your case and the AllowOverride option is set to None. Therefore, please add what you modified at /opt/bitnami/apps/wordpress/htdocs/.htaccess to that file and then, restart Apache.

I have tried this but it didnt work, maybe I did it wrong. This is the output from /opt/bitnami/apps/wordpress/conf/htaccess.conf

<Directory “/opt/bitnami/apps/wordpress/htdocs/wp-content/plugins/akismet”>

# Only allow direct access to specific Web-available files.

# Apache 2.2
<IfModule !mod_authz_core.c>
Order Deny,Allow
Deny from all
</IfModule>

# Apache 2.4
<IfModule mod_authz_core.c>
Require all denied
</IfModule>

# Akismet CSS and JS
<FilesMatch “^(form\.js|akismet\.js|akismet\.css)$”>
<IfModule !mod_authz_core.c>
Allow from all
</IfModule>

<IfModule mod_authz_core.c>
Require all granted
</IfModule>
</FilesMatch>

# Akismet images
<FilesMatch “^logo-full-2x\.png$”>
<IfModule !mod_authz_core.c>
Allow from all
</IfModule>

<IfModule mod_authz_core.c>
Require all granted
</IfModule>
</FilesMatch>
</Directory>
<Directory “/opt/bitnami/apps/wordpress/htdocs/wp-content/plugins/versionpress”>
# Apache 2.2
<IfModule !mod_authz_core.c>
Order Deny,Allow
Deny from all
</IfModule>

# Apache 2.4
<IfModule mod_authz_core.c>
Require all denied
</IfModule>

</Directory>
<Directory “/opt/bitnami/apps/wordpress/htdocs/wp-content/plugins/versionpress/admin/public”>
# Apache 2.2
<IfModule !mod_authz_core.c>
Allow from all
</IfModule>

# Apache 2.4
<IfModule mod_authz_core.c>
Require all granted
</IfModule>

</Directory>

# BEGIN WP-HUMMINGBIRD-CACHING
<IfModule mod_expires.c>
ExpiresActive On
ExpiresDefault A0

<FilesMatch “\.(txt|xml|js)$”>
ExpiresDefault A691200
</FilesMatch>

<FilesMatch “\.(css)$”>
ExpiresDefault A691200
</FilesMatch>

<FilesMatch “\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav|mp4|m4v|ogg|webm|aac|eot|ttf|otf|woff|svg)$”>
ExpiresDefault A691200
</FilesMatch>

<FilesMatch “\.(jpg|jpeg|png|gif|swf|webp)$”>
ExpiresDefault A691200
</FilesMatch>
</IfModule>

<IfModule mod_headers.c>
<FilesMatch “\.(txt|xml|js)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>

<FilesMatch “\.(css)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>

<FilesMatch “\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav|mp4|m4v|ogg|webm|aac|eot|ttf|otf|woff|svg)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>

<FilesMatch “\.(jpg|jpeg|png|gif|swf|webp)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>
</IfModule>
# END WP-HUMMINGBIRD-CACHING

Hello, I dont have a hosting provider, the site is hosted on my own AWS EC2 server. So I have full control over the setup. I have tried several suggestions that I found on the bitnami forums, but none are working. So if there is any server setup suggestions you could offer to solve this issue, I would be most grateful. Thanks.

• This reply was modified 6 years, 6 months ago by adrianbakar.

Hello,

Clicking the re-check expiry just results in the same error.

This is a copy of the current /opt/bitnami/apps/wordpress/htdocs/.htaccess

# BEGIN WordPress
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
RewriteRule ^index\.php$ – [L]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule . /index.php [L]
</IfModule>

# END WordPress
# BEGIN WP-HUMMINGBIRD-CACHING
<IfModule mod_expires.c>
ExpiresActive On
ExpiresDefault A0

<FilesMatch “\.(txt|xml|js)$”>
ExpiresDefault A691200
</FilesMatch>

<FilesMatch “\.(css)$”>
ExpiresDefault A691200
</FilesMatch>

<FilesMatch “\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav|mp4|m4v|ogg|webm|aac|eot|ttf|otf|woff|svg)$”>
ExpiresDefault A691200
</FilesMatch>

<FilesMatch “\.(jpg|jpeg|png|gif|swf|webp)$”>
ExpiresDefault A691200
</FilesMatch>
</IfModule>

<IfModule mod_headers.c>
<FilesMatch “\.(txt|xml|js)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>

<FilesMatch “\.(css)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>

<FilesMatch “\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav|mp4|m4v|ogg|webm|aac|eot|ttf|otf|woff|svg)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>

<FilesMatch “\.(jpg|jpeg|png|gif|swf|webp)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>
</IfModule>
# END WP-HUMMINGBIRD-CACHING

Browser Caching is not working properly:

– Your server may not have the “expires” module enabled (mod_expires for Apache, ngx_http_headers_module for NGINX)
– Another plugin may be interfering with the configuration
If re-checking and restarting does not resolve, please check with your host or open a support ticket with us.

4 of your cache types don’t meet the recommended expiry period of 8+ days. Configure browser caching here.

Automatic browser caching is active.

Hello,

I did as you suggested, after clicking recheck it says:

GZip compression is currently active. Good job!

But the browser caching is still showing the same error

Thanks

Hello, thanks for your reply. I opened /opt/bitnami/apps/wordpress/htdocs/.htaccess and it seems the same entries were already created when I selected the auto enable mode:

# BEGIN WordPress
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
RewriteRule ^index\.php$ – [L]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule . /index.php [L]
</IfModule>

# END WordPress
# BEGIN WP-HUMMINGBIRD-CACHING
<IfModule mod_expires.c>
ExpiresActive On
ExpiresDefault A0

<FilesMatch “\.(txt|xml|js)$”>
ExpiresDefault A691200
</FilesMatch>

<FilesMatch “\.(css)$”>
ExpiresDefault A691200
</FilesMatch>

<FilesMatch “\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav|mp4|m4v|ogg|webm|aac|eot|ttf|otf|woff|svg)$”>
ExpiresDefault A691200
</FilesMatch>

<FilesMatch “\.(jpg|jpeg|png|gif|swf|webp)$”>
ExpiresDefault A691200
</FilesMatch>
</IfModule>

<IfModule mod_headers.c>
<FilesMatch “\.(txt|xml|js)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>

<FilesMatch “\.(css)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>

<FilesMatch “\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav|mp4|m4v|ogg|webm|aac|eot|ttf|otf|woff|svg)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>

<FilesMatch “\.(jpg|jpeg|png|gif|swf|webp)$”>
Header set Cache-Control “max-age=691200”
</FilesMatch>
</IfModule>
# END WP-HUMMINGBIRD-CACHING

Screenshots during problem:

Screenshots when normal: