misdim

Hello again!

I had it disabled till I find a fix, which I did. Apparently if there are many pop ups, even if they are configured on specific and different pages and with “On click” setting, they use to many resources and as a result the site ends up in error 500.
For example the Home Page doesnt have any pop up but I get the error there too.

So right now it is enabled again and fully working. I installed a cache plugin and experimented with the settings of it and the problem is solved for now.

Sorry for the dellayed answer.
It appeared to be a problem from my hosting provider side. I don’t know what the problem was, but they fixed it and the Site kit works great.

Many many thanks for your assistance and for the time you spent trying to solve my issue!

I contacted my hosting provider and informed them about the problem and the steps that we’ve tried and they will check it.
I’ll let you know when I have an answer from them.

Just went through the steps you described above and tried to connect the Site Kit.
All the entries at the network tab have status 200. (Incognito and preserve log: on)

You think I sould contact my server hosting company?

Great!!

I checked for differences between a site with a working Site kit and this one and they don’t have any.
They both have:
– Theme: Avada 7.7.1
– WordPress: 6.0
– PHP: 7.4.30
– cURL: 7.64.0

I unistalled and re-installed the plugin but with no result.
I also checked the logs from ModSecurity 2.9. You can see them bellow:

2022-06-20 11:18:04 Error .078273 [NOTICE] [21726] [T1] [94.71.4.194:27701-H3:482E66507C0C8353-8#APVH_****.gr:443:MODSEC] mod_security rule [id “33308”] at [/etc/apache2/modsecurity.d/rules/custom/002_i360_1_vectors.conf:15] triggered!

2022-06-20 11:18:35 Error .119993 [NOTICE] [21726] [T2] [94.71.4.194:27701-H3:482E66507C0C8353-348#APVH_****.gr:443:MODSEC] mod_security rule [id “33308”] at [/etc/apache2/modsecurity.d/rules/custom/002_i360_1_vectors.conf:15] triggered!

I switched off security rules with the ids “33332” & “33308” and tried again. In this case I dont get the errors in ModSecurity that I sent you above but the result is the same.
I also deactivated ModSecurity 2.9 but no result again.

Thanks again for your time!

• This reply was modified 2 years, 5 months ago by misdim.

Tried the steps you described above but the result is still the same.

There is an error (403) at the console at the “The link you followed has expired” page:

GET https://****.gr/wp-admin/index.php?action=googlesitekit_proxy_exchange_site_code&googlesitekit_code=sitekit-****&googlesitekit_site_code=****&nonce=****&step=verification 403

I also just installed Site Kit for the 1st time on a different domain on the same server and I get the same error and loop there too.
Although I have other domains on the server with Site Kit and it works great.

Just shared via the form a recording of my screen with the issue and the Health status using an incognito window.

Hope it helps!

Hi James!

Thanks for the quick response!

1. The URLs are the same from the development of the site and this is the 1st time I installed the Google Site Kit and tried to connect it.

2. When I click on the Verify, button it is redirecting me to log in again here:

https://****.gr/wp-login.php?redirect_to=https%3A%2F%2F****.gr%2Fwp-admin%2Findex.php%3Faction%3Dgooglesitekit_proxy_exchange_site_code%26googlesitekit_code%3Dsitekit-***********ode%26googlesitekit_site_code%************%26nonce%************%26step%3Dverification&reauth=1

After typing the credentials, it is redirecting me on the link bellow, with this message “The link you followed has expired.
Please try again.”

https://*****.gr/wp-admin/index.php?action=googlesitekit_proxy_exchange_site_code&googlesitekit_code=sitekit-****ode&googlesitekit_site_code=****&nonce=****&step=verification

And when I click on “Please try again” it takes me to the Site Kit dashboard but it is not connected and the loop starts again.

(I am not sure if it is safe for the links to be public so I added some ****. Let me know If you need the whole links)

Thanks again!

Yes its the 4 results and 100 more.
Maybe I’ll try to contact Flatsome support.

Many many thanks for your excellent assistance!!

At the admin search I just tried a title of a book and i get 4 results.
At the frontsite’s search i get the same number at the search results page but at the live results i get more than 100

Not at the results page. At the live results during typing.
Before adding the code that you send me, when i typed a book title, it showed only the right match and some books that contained the same words.

Actually it shows in the results 101 books no matter what I type on search.
Even if I search by title, it shows the right one on top and 100 more books bellow.

Already did that but nothing changed.

Great!! Just added the code and it seems to work.
There is only one problem. When I type 978-618-03-1750-3 with or without dashes it brings out the right book as the firtst result but bellow it, it also brings all the books that their ISBN starts with 978-618-03

Its from the theme.
I am using Flatsome from UX Themes.